Automotive Dome Labels
Badges for your own automotive brand: dealerships, tuners, parts makers, fleets and trailer builders. Your artwork sits under a raised, clear polyurethane dome, built for outdoor use.
No minimum order. A digital proof before anything is printed.





Where automotive businesses use dome labels
The same label each time: your artwork under a raised, clear polyurethane dome, cut to the shape you need.
Dealership badges
Your dealership name on the trunk lid or tailgate of the cars you sell.
Wheel center caps
Round domes sized to the recess of a center cap, with your own wheel or tuning brand.
Key fobs and interior trim
Small badges for fobs, gear knobs and flat spots on the dashboard.
Aftermarket and performance parts
A maker’s badge on covers, housings and accessories you manufacture.
Motorcycles and helmets
Shop, team and club badges for fairings, tanks and helmets.
Fleet and service vehicles
Company name badges for vans, trucks and service units.
Trailers and haulers
Maker badges for fenders and side panels of utility trailers and car haulers.
Clubs and events
Short runs of badges for car clubs, meets and track days.
Why a dome label suits a vehicle
- Built for outdoor useThe polyurethane dome is UV-stable and does not yellow, and it is made to last for years outdoors.
- The print is sealedArtwork sits under the resin, so water does not reach the print and washing or wiping wears on the dome, not on the ink.
- It looks like a badge, not a stickerThe raised, glossy dome gives a 3D look without tooling, mold or die charges.
- Cut to fit the partCircle, oval, rectangle or a custom outline, made to the size of your cap, recess or panel.
- You can test it on the vehicleA sample pack of your own design lets you check the dome and the adhesive on the real surface first.
What the label is
- Dome
- Clear polyurethane resin, not epoxy. UV-stable, so it stays clear instead of yellowing.
- Your artwork in full color on white, metallic silver or metallic gold film.
- Shape
- Circle, oval, rectangle or a custom outline cut to your design.
- Adhesive
- Standard for clean, smooth, flat surfaces, or 3M high-tack for more demanding ones.
- Quantity
- No minimum order. One to 10,000 pieces online; larger and recurring runs are quoted.
- Supplied
- Finished peel-and-stick labels on sheets, ready to apply.
We do not publish test certificates or ratings for specific chemicals, temperatures or standards. If your part has a requirement like that, tell us what it is and test a sample on the real surface before you order a run.
Full label specificationsAutomotive dome labels in use









How an order works
- 1
Price it online
Enter size and quantity and see the price straight away. The price per label drops quickly with quantity.
- 2
Approve a proof
We email a digital proof at actual size. Nothing is produced until you sign it off.
- 3
Made in 5 business days
Production takes 5 business days after you approve the proof.
- 4
Delivered
Shipping takes 3 to 4 days on average and is included in the price.
Automotive dome label questions
- What temperature range can automotive dome labels withstand?
- We have not tested our labels against a specific temperature range, so we do not publish one. The labels are built for outdoor use on vehicles. For a hot location such as an engine bay or a wheel, order a sample pack and test it on the actual part before committing to a run.
- Are dome labels safe for automatic car washes?
- We do not publish a car wash or pressure-wash rating. The print is sealed under the dome, so water does not reach it, but how well a label holds depends on the surface and the adhesive. Order a sample pack, apply one to the vehicle and put it through your own wash before ordering a run.
- Are automotive dome labels resistant to fuel and oil spills?
- We have not tested our labels against fuel, oil, brake fluid or other automotive fluids, so we do not make that claim. If the label will sit where spills are likely, test a sample on the real part under your own conditions first.
- Can I get dome labels custom-shaped to fit specific vehicle parts?
- Yes. Labels are made as circles, ovals, rectangles or a custom outline at the size you give us, and you approve a digital proof at actual size before production. We print your own brand artwork. We do not reproduce car manufacturers’ logos or emblems.
- Do dome labels work on trailers and car haulers?
- Yes, dome labels are used as maker badges on trailer fenders and side panels. For painted or powder-coated trailer parts we suggest the 3M high-tack adhesive, and you should test adhesion on the real surface. If you need a data plate where every label carries a different serial number, tell us in your quote request.
- Can I test a sample before I order?
- Yes. For $50 we print your own artwork and make 5 real domed samples in 2–3 sizes, express shipped, so you can test the dome and the adhesive on a real panel, fender or wheel cap. The full $50 comes off a first order of 100 or more pieces. If you would rather see it on screen first, send your artwork and we will email a digital proof at actual size.
Price your automotive badges
Enter your size and quantity to see the price, or send us the part and the artwork and we will quote it.
Explore More from DomePrints
Products
- Custom Dome Labels
- Polyurethane Labels
- Equipment Labels
- Durable Labels
- Weatherproof Labels
- Domed Stickers
- Domed Decals
- Domed Badges & Emblems
- Custom Car Emblems & Badges
- Car Dealership Decals
- Wheel Center Cap Stickers
- Custom PC Case Badges
- Golf Dome Labels & Inserts
- Wholesale & OEM Dome Labels
- Doming Stickers & Bubble Labels
- Circle & Round Dome Labels
- Rectangle & Square Dome Labels
- Oval Dome Labels
- Die-Cut & Contour Shapes
Industries
Resources & Guides
- Free Domed Label Cost Calculator
- $50 Custom Sample Pack
- Custom & Bulk Project Quote
- Trade & Reseller Portal (20% Off)
- Pricing Data & Methodology
- Manufacturer Overview
- Product Specifications
- Application Checklist & CSV
- Shipping to Canada
- How to Brand Manufactured Products
- What Are Dome Labels?
- Polyurethane vs Epoxy
- Design Guide
- Dome Labels vs Stickers
- How to Apply
- White Ink Printing
- About DomePrints
- FAQ