Marine Dome Labels
Badges and panel labels for boats, yachts and marine equipment: your artwork sealed under a raised, clear polyurethane dome that is built for outdoor use.
No minimum order. A digital proof before anything is printed.

Where marine brands use dome labels
The same label each time: your artwork under a raised, clear polyurethane dome, cut to the shape you need.
Helm and dashboard panels
Legend labels for switches and a builder’s badge on the dash.
Boat builder branding
Model and maker badges on consoles, hatches and trim.
Boat names and marinas
Small boat-name and marina badges for gear, lockers and dock boxes.
Navigation and electronics
Brand badges for the housings of displays, radios and instruments.
Jet skis and personal watercraft
Brand and model badges on flat areas above the waterline.
Fishing equipment
Labels for tackle boxes, rod holders and trolling motor housings.
Engine and equipment covers
Your own brand badge on a cowl, cover or equipment housing.
Docks and marinas
Numbering and identification labels for slips, lockers and dock equipment.
Why a dome label suits a boat
- Water does not reach the printThe artwork is sealed under the resin dome, so spray and rinsing land on the dome and not on the ink.
- It stays clear in the sunThe polyurethane dome is UV-stable and does not yellow the way epoxy does.
- It looks factory fittedThe raised, glossy dome gives a panel label or badge the depth of a molded emblem.
- One boat or a production lineThere is no minimum order, so a single refit and a builder’s yearly run are both fine.
- You can test it on boardA sample pack of your own design lets you check the dome and the adhesive on the real surface first.
What the label is
- Dome
- Clear polyurethane resin, not epoxy. UV-stable, so it stays clear instead of yellowing.
- Your artwork in full color on white, metallic silver or metallic gold film.
- Shape
- Circle, oval, rectangle or a custom outline cut to your design.
- Adhesive
- Standard for clean, smooth, flat surfaces, or 3M high-tack for more demanding ones.
- Quantity
- No minimum order. One to 10,000 pieces online; larger and recurring runs are quoted.
- Supplied
- Finished peel-and-stick labels on sheets, ready to apply.
We do not publish test certificates or ratings for specific chemicals, temperatures or standards. If your part has a requirement like that, tell us what it is and test a sample on the real surface before you order a run.
Full label specificationsMarine dome labels in use

How an order works
- 1
Price it online
Enter size and quantity and see the price straight away. The price per label drops quickly with quantity.
- 2
Approve a proof
We email a digital proof at actual size. Nothing is produced until you sign it off.
- 3
Made in 5 business days
Production takes 5 business days after you approve the proof.
- 4
Delivered
Shipping takes 3 to 4 days on average and is included in the price.
Marine dome label questions
- Are marine dome labels truly waterproof?
- The print is sealed under the polyurethane dome, so water does not reach it. We have not run immersion trials and do not rate the labels for use under water, so we recommend them for surfaces above the waterline. Order a sample pack and try it on your own boat first.
- How long do marine dome labels last in salt water environments?
- They are built for outdoor use and made to last for years: the dome is UV-stable and does not yellow. We have not run salt spray trials and do not quote a number of years, because life depends on the surface, the adhesive and the conditions. Test a sample on the hull, console or gear before you order a run.
- Can marine dome labels withstand fuel, oil, and cleaning chemicals?
- We have not tested our labels against specific fuels, oils or cleaners, so we do not publish a resistance list and do not recommend them for engine rooms on that basis. If the label will meet a particular fluid or cleaner, test a sample with it first.
- Can you make hull identification number plates or required safety and capacity labels?
- No. We do not supply labels as meeting Coast Guard or any other regulatory requirement, and we do not hold certifications for them. Our labels are for branding and general identification. If you have a formal requirement, send it to us before ordering so we can tell you plainly whether we can meet it.
- Do you offer custom branding for boat manufacturers and marine companies?
- Yes. We print your artwork in full color on white, metallic silver or metallic gold film, in a circle, oval, rectangle or a custom outline. We print only brands you own or are licensed to use. Larger and recurring runs are quoted, and approved resellers get 20% off through our trade program.
- Can I test a sample before I order?
- Yes. For $50 we print your own artwork and make 5 real domed samples in 2–3 sizes, express shipped, so you can test the dome and the adhesive on your hull, console or equipment. The full $50 comes off a first order of 100 or more pieces. If you would rather see it on screen first, send your artwork and we will email a digital proof at actual size.
Price your marine labels
Enter your size and quantity to see the price, or send us the part and the artwork and we will quote it.
Explore More from DomePrints
Products
- Custom Dome Labels
- Polyurethane Labels
- Equipment Labels
- Durable Labels
- Weatherproof Labels
- Domed Stickers
- Domed Decals
- Domed Badges & Emblems
- Custom Car Badges
- Car Dealership Decals
- Golf Dome Labels & Inserts
- Wholesale Dome Labels
- Dome Sticker Printing
- Circle & Round Dome Labels
- Rectangle & Square Dome Labels
- Oval Dome Labels
- Die-Cut & Contour Shapes
Industries
Resources & Guides
- Free Domed Label Cost Calculator
- $50 Custom Sample Pack
- Custom & Bulk Project Quote
- Trade & Reseller Portal (20% Off)
- Pricing Data & Methodology
- Manufacturer Overview
- Product Specifications
- Application Checklist & CSV
- Shipping to Canada
- How to Brand Manufactured Products
- What Are Dome Labels?
- Polyurethane vs Epoxy
- Design Guide
- Dome Labels vs Stickers
- How to Apply
- White Ink Printing
- About DomePrints
- FAQ